1994 acura integra ls sedan, safetied!
 

INFORMATION:

'94 integra sedan
safety was done at 229,344km's - jul 3rd/09
rosewood brown exterior colour
ls model - power everything, tan cloth interior
5 speed, shifts great



the bad first (get it out of the way):
- needs body work, paint
- didn't pass etest in oct '08, likely cat, i have a couple of them (magnaflow), don't know what else offhand
- brakes are a bit rusty, but lots of pad life left, and passed safety as they are

the good:
- safetied jul 3/2009!
- all power options, and everything works (a/c, heat, locks, windows, mirrors, sunroof) except rear drivers side window.. likely just a wire fix
- timing belt and waterpump were done at rebuild, which was around 15,000km ago
- fairly new plugs, wires, dizzy cap (and have a new rotor, just didn't get around to it)
- rebuild motor with 10:1 je pistons and other upgrades - rebuild/build-up done at 216,586km by answer engine works
- head was checked in the spring at napa - it is PERFECTLY in spec and no cracks
- head gasket was changed in spring
- oil/filter done regularily 5,000km or less, castrol gtx used specifically since rebuild
- tranny oil changed in spring '08 with gm syncromesh, shifts perfectly
- 14" 5-spoke alloys with meaty tread on m+s tires
- h&r sport lowering springs
- koni yellow shocks - used only a matter of a couple months
- 98-01 oem all-red tails
- sunroof with no leaks
- interior in great condition, no rips.. a TINY bit of fiberglass on one front seat
- will sell with an aftermarket deck in it since i don't have an oem deck anymore
- 6.5" components up front, infinity 6x9's in the rear, will sell with 4channel sony amp, all wired already, rca's already wired for second amp for sub too
- tinted all round... 20%, and it was done by tint king about 4yrs ago
- front abs plastic lip, mugen style unpainted black
- vibrant j-spec 4-2-1 stainless header (was $500 retail alone!), 2.25" magnaflow highflow cat, stainless 2.25" piping, 18" magnaflow resonator, 2.25" oval magnaflow muffler
- b&m dual bend short shifter
- blacked out clear corners with amber bulbs
- brand new battery!! jul '09


information on rebuild:
Answer Engine Works Inc did the work
- 10:1 82mm je pistons
- rod bearings (part# 4b9401)
- main bearings (part# ms2095p)
- thrust bearings (part# tw6015)
- performance alloy rings and pins
- competition (3-angle) valve grind
- resurface head
- regrind cams
- oil pump (part# oph18s)
- polished crank
- bored cylinders, deck, block
- resize connecting rods
- reface rockers

PICTURES:
http://pixelist.org/g/2009/04/10/integra/

PRICE:
$1800

- priced low to get it OUT of here! i have a truck and motorcycle now, no need/room for all 3 vehicles!

CONTACT:
jesse@cablek.org

LOCATION:
london, ontario


thanks!